Icom IC-M1V Instruction Manual page 21

× Weather alert function
"WX ALERT"
An NOAA broadcast station transmits a
weather alert tone before any important
weather information. When the weather
alert function is turned ON, the trans-
ceiver detects the alert, then flashes the
"ALT" indicator until the transceiver is op-
erated. The previously selected (used)
weather channel is checked any time
during standby, or while scanning, when
the power save function is activated.
• "ALT" appears when the function is set ON.
Push
Weather alert
ON
Push
Weather alert
OFF (default)
Scrolls the channel
comment, "
× Scan type selection
"SCAN TYPE"
The transceiver has 2 scan types: nor-
mal scan and priority scan. Normal
scan searches all tag channels in the
selected channel group. Priority scan
searches all tag channels in sequence
while monitoring channel 16.
Push
Priority scan
selection
Push
Normal scan
selection
(default)
Scrolls the channel
". comment, "
SET MODE
× Scan resume timer
"SCAN TIMER"
The scan resume timer can be selected
as a pause (OFF) or timer scan (ON).
When OFF is selected, the scan
pauses until the signal disappears.
When ON is selected, the scan pauses
5 sec. and resumes, even if a signal is
being received on channels, other than
channel 16.
Push
Scan resume
timer ON
Push
Scan resume
timer OFF
(default)
Scrolls the channel
". comment, "
8
".
17