Memory Operation; I Memory Channel Selection; I Transferring Memory Contents - Icom IC-A24 Instruction Manual

I Memory channel selection

The transceiver has 200 memory channels for storage of
often-used frequencies along with 6-character notes.
q Push [MR•
] to select memory mode.
MW
• Memory BANK number and memory CH. number appears.
Using [DIAL]:
w Push [0•
], then rotate [DIAL] to select the desired
BANK
memory BANK number, then push [0•
[CLR• ]) to exit the BANK selection mode.
DEL
• "BANK" appears.
e Rotate [DIAL] to select the desired memory CH. number.
• If no memory CH. is programmed in the selected BANK, no
memory CH. selection is available.
Using the Keypad:
w Push [0•
], then push appropriate digit key ([0•
BANK
to [9• ]) to select the desired memory BANK number,
TAG
then push [0• ] (or [CLR•
BANK
lection mode.
• "BANK" appears.
e Push 2 appropriate digit key (00 to 19) to select the de-
sired memory CH. number.
• If no memory CH. is programmed in the selected BANK, no
memory CH. selection is available.
NOTE: Comments appear first when programmed, how-
ever, the transceiver can be programmed by your dealer to
show the operating frequency first. Push [MR•
play the comment in this case.
] (or
BANK
]
BANK
]) to exit the BANK-se-
DEL
] to dis-
MW

MEMORY OPERATION

I Transferring memory
contents
This function transfers a memory channel's contents into the
frequency mode. This is useful when searching for signals
around a memory channel's frequency.
q Push [MR•
] to select memory mode.
MW
w Select the desired memory channel to be transferred using
[DIAL] or keypad.
e Push
, then push [MR•
channel's contents into the frequency mode.
• BANK number and memory CH. number disappears as
frequency mode is automatically selected and the mem-
ory contents are transferred.
Memory mode
4
] to transfer the memory
MW
Frequency mode
3
4
12