Icom IC-78 Instruction Manual page 34

5
SET MODE
Initial set mode items
• Key type
Selects the CW paddle type. Four selections are available.
• n : normal
(for electronic keyer use)
• r : reverse
(for electronic keyer use)
• oF : Turns OFF the electronic keyer
• ud : For using the microphone's [UP]/[DN] keys instead of the paddle.
The default is n (normal).
• Tuner type
Selects the connected antenna tuner type. Four selections are available.
• no : No optional tuner is connected.
• 4 : When AH-4 is connected.
• 12 : When AT-120 is connected.
• 13 : When AT-130 is connected.
The default is no.
• Number of maximum memory channels
Sets number of programmable memory channels from 1 to 99.
The default is 99.
• CI-V baud rate
Sets the data transfer rate. When "Auto" is selected, the baud rate is automati-
cally set according to the connected controller or remote controller.
The default is At (Auto).
• CI-V address
To distinguish equipment, each CI-V transceiver has its own Icom standard ad-
dress in hexadecimal code. The IC-78's address is 62.
When 2 or more IC-78s are connected to an optional CT-17
, rotate the main dial to select a different address for each IC-78 in the
VERTER
range 01H to 7FH.
The default is 62.
• CI-V Transceive
Transceive operation is possible with the IC-78 connected to other Icom HF
transceivers or receivers. When "on"is selected, changing the frequency, oper-
ating mode, etc. on the IC-78 automatically changes those of connected trans-
ceivers (or receivers) and vice versa.
The default is on.
• CI-V 731 mode
When connecting the IC-78 to the IC-735 for transceive operation, you must
change the operating frequency data to 4 bytes.
• This item MUST be set to "on" when operating the transceiver with the IC-735.
The default is oF (off).
32
— (continued)
(for straight key use)
CI
- -
V LEVEL CON