Model Identification; Prior To Installation - Fisher & Paykel Classic Series Installation Manual

NOTE: Model features may vary
30" INDUCTION MODELS
OR30SDI6
OR30SCI6
Unpacking and handling
Inspect the range to verify that there is no shipping damage. If any damage is detected, call the shipper and initiate a damage claim. Fisher & Paykel is not responsible for shipping damage.
● ●
DO NOT discard any packing material until the range has been inspected.
● ●
Remove the outer carton and any packing material from range. Some models are supplied with a protective film on steel and aluminum parts.
● ●
This film must be removed before installing or using the appliance.
6

MODEL IDENTIFICATION

30" CERAMIC MODELS
OR30SDE6

PRIOR TO INSTALLATION