Eizo ColorEdge G2420-BK User Manual page 26

Function
Execute
Settings Schedule Start time
Adjustable range
- SelfCalibration can be executed manually regardless of the
schedule.
Power Save Select the timing to execute SelfCalibration upon reaching the
Immediately time set in the schedule.
Off • "Power Save"
To be executed under any of the following conditions.
- When the monitor is in "Power Save" mode or power is
off at the set time.
- The monitor shifts to the power saving mode or the
power is turned off when the time period set in the
schedule has elapsed.
• "Immediately"
SelfCalibration is executed immediately at the set time.
• "Off"
SelfCalibration is not executed.
- 26 -
Chapter 3 Advanced Adjustments/Settings
Description Note
• After selecting "Execute", warming
up (after the power to the monitor
is switched on, the monitor requires
a certain period of time until the
display becomes stable) may be
executed before the built-in calibra-
tion sensor comes out.
• Upon reaching the set time, the
power indicator will blink in white
(quickly twice).