Eizo ColorEdge G2420-BK User Manual page 21

Function Adjustable range
Temperature Native
4000 K to 10000 K
Adobe
sRGB
Gamma 1.6 to 2.7
Adobe
sRGB
Color Gamut Native
Adobe
sRGB
Advanced Set- Hue -100 to 100
tings
Saturation -100 to 100
The color temperature can be adjusted.
The color temperature is used to express the hue of "White" or
®
RGB "Black" by a numerical value. The value is expressed in degrees "K"
(Kelvin).
The screen becomes reddish at a low color temperature, and blu-
ish at a high color temperature, like the flame temperature.
Specify color temperature in units of 100 K, or select a color
temperature that complies with each standard.
Adjust the gamma.
®
RGB The brightness of the monitor varies depending on the input
signal, however, the variation rate is not simply proportional to the
input signal. The control performed to keep the balance between
the input signal and the brightness of the monitor is called "Gam-
ma correction".
You can set the gamma, or select the gamma curve defined by
each standard.
Set the color reproduction area (color gamut).
®
RGB "Color gamut" is the range of colors that devices such as monitors,
digital cameras and printers can represent. Multiple standards are
defined.
Adjust the hue.
Adjust the color saturation.
Description
- 21 -
Chapter 3 Advanced Adjustments/Settings
Note
• When you select "Native", the original color of
the monitor (Gain: 100% for each RGB) is dis-
played.
• "Gain" allows you to perform more advanced
adjustment. When gain is changed, the color
temperature is changed to "User".
• The gain preset values are set for each color
temperature setting value.
-
• When you select "Native", the original color
gamut of the monitor is displayed.
• The method of displaying colors outside the
monitor's displayable range within the defined
color gamut can be set. For more information,
see "Clipping" (page 22).
• Using this function may make some color
gradations unavailable for display.
• Using this function may make some color
gradations unavailable for display.
• The minimum value (-100) changes the
screen to monochrome.