Setting Power Indicator; Enabling / Disabling Automatic Brightness Adjustment - Eizo FlexScan EV2730Q-GY User Manual

4-2. Setting Power Indicator

This function allows you to set the power indicator (
Procedure
1. Choose "Monitor Settings" in the Setting menu, and press
2. Choose "Power Indicator" in the "Monitor Settings" menu, and press
The "Power Indicator" menu appears.
3. Select "On" or "Off" with
4. Press
4-3. Enabling / Disabling Automatic Brightness
Adjustment
The ambient light sensor on the front side of the monitor detects the environmental brightness to adjust
the screen brightness automatically and comfortably by using the Auto EcoView function.
Attention
• Be careful not to block the ambient light sensor on the lower side of the monitor when using the Auto EcoView
function.
Procedure
1. Press .
2. Choose "Auto EcoView" in the "EcoView Menu" menu, and press
The "Auto EcoView" menu appears.
3. Select "High", "Standard", or "Off" with
4. Press
Note
• As "Brightness" in the Setting menu is changed, the auto adjustment range for Auto EcoView is also changed.
• Set to "High" if you feel a little brighter with "Standard" setting status.
or .
to exit.
to exit.
) ON / OFF in the monitor ON condition.
white
or .
Chapter 4 Power Saving Functions
.
.
.
23