Removing The Flywheel And Stator Coil Assembly - Yamaha EH63 Service Manual

TCI UNITS, FLYWHEEL AND STATOR COIL ASSEMBLY
2 1
REMOVING THE FLYWHEEL AND STATOR COIL
ASSEMBLY
1.
Remove:
• Air filter
(Refer to "AIR FILTER" on page 3-3.)
2.
Remove:
• Fan case and fan
(Refer to "CASE AND FAN" on page 3-14.)
3.
Remove:
• Rectifier/regulator
(Refer to "RECTIFIER/REGULATOR" on page
3-13.)
4.
Remove:
• Cylinder covers
(Refer to "CYLINDER COVERS" on page 3-17.)
5.
Remove:
• TCI units "1"
1
6.
Remove:
• Flywheel nut "1"
• Washer "2"
TIP
3
Attach the sheave holder "3" to hold the flywheel.
Sheave holder:
Primary clutch holder:
7.
Remove:
• Flywheel "1"
• Woodruff key
TIP
1
• Remove the flywheel "1" using the flywheel puller "2".
• Fully tighten the tool holding bolts, making sure the tool
2 body is parallel with the flywheel. If necessary, one bolt
may be backed out slightly to level the tool body.
3-21
90890-01701
YS-01880-A
1
2
3
4
5
6
7
8
9
10