Setup Guide
Preparations
This provides information on setup and initial settings in preparation for playing.
Installing the DTX-PRO
First, install the DTX-PRO.
There are three different ways of installation as shown below.
Attach the DTX-PRO onto the rack of your drum kit. (For more information, refer to the Assembly Manual.)
User the included module holder (page 6) to attach the standard drum hardware. (See "Integrating Electronic &
Acoustic Drums" on page 59.)
Place on a flat surface
After installing the DTX-PRO, connect cables to the Pads. For more information on the connections, refer to the specific
Assembly Manual of your drum kit.
14
DTX-PRO Owner's Manual
Workflow
Installing the DTX-PRO
Connecting the AC adaptor
Connecting Headphones
Turning On
Initial Setup (Trigger Setup Wizard)
This completes set up.