Yamaha DTX-PRO Owner's Manual page 65

 Connecting a Computer
You can connect the DTX-PRO to a computer and use DAW (Digital Audio Workstation) software such as the included
Cubase AI to record your performance, edit, or mix audio.
For more information on how to connect a computer, refer to the Reference Manual (PDF). For more information on how to
use the DAW software, refer to the Owner's Manual for your DAW software.
Precautions when using the [USB TO HOST] terminal
When connecting the computer to the [USB TO HOST] terminal, make sure to observe the following points to avoid
freezing the computer and corrupting or losing the data.
NOTICE
• Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used.
• Execute the following before turning the power to the instrument on/off or plugging/unplugging the USB cable to/
from the [USB TO HOST] terminal.
- Quit any open application software on the computer.
- Make sure that data is not being transmitted from the instrument.
• While the computer is connected to the instrument, you should wait for six seconds or more between these oper-
ations: (1) when turning the power of the instrument off then on again, or (2) when alternately connecting/discon-
necting the USB cable.
If the computer or the instrument freezes, restart the application software or the computer OS, or turn the power to
the instrument off then on again.
Connecting Separately Sold Add-ons and External Devices
Application Guide
DTX-PRO Owner's Manual 61