Yamaha DTX-PRO Owner's Manual page 47

 Recording to a USB Flash Drive
1.
Connect a USB flash drive to the [USB TO DEVICE] terminal on the rear panel.
When a USB flash drive is connected
• You can record up to 90 minutes at a time.
• A new file is created every time you record.
• Simultaneous playback and recording to overdub your performance onto the currently playing
song.
2.
Press the [RECORDER] button.
The [RECORDER]
button flashes
while recording.
Recording
3.
Press the button below "
start recording.
While recording, the
elapsed recording time
(min: sec) appears.
4.
Play the drums.
5.
After you finish playing, press the but-
ton below " " ([F1]) to stop recording.
The RECORDER SAVE
screen appears.
6.
Press the button below "SAVE" ([F3])
and save the file.
Press the button below
"CANCEL" ([F2]) if
you do not want to save
the file.
NOTE
If you want to change the file name, press the button below
"NAME" ([F1]) and enter a new name. (page 37)
The RECORDER (USB) screen appears.
Destination
File name
NOTE

" ([F1]) to
This is not displayed when there
is no recorded song.
3.
NOTE
Up to 1,000 songs are recog-
nized.
4.
5.
Recording Your Performance
Playing Back
Use the [–][+] con-
trollers to select a
song for playback.
or
Press the button
below ">" ([F2]) to
start playback.
Press the button

below " " ([F2]) to
stop playback.
Basic Guide
Playback speed
Changing Other
Settings
Other settings such as
the playback speed or
the recording source
can be changed. For
more information,
refer to the Reference
Manual (PDF).
DTX-PRO Owner's Manual 43