Yamaha DTX-PRO Owner's Manual page 20

Setup Guide
Installing the DTX-PRO
4.
Hook the AC adaptor's cord around the cord
hook to secure it in place.
CAUTION
Excessive bending can damage the AC adaptor cord
and create a fire hazard. Ensure, therefore, that the
power cord is not bent at an extreme angle when
wrapped around the hook.
5.
Plug the AC adaptor's AC plug into a domes-
tic power outlet.
CAUTION
Even when the [
status (power lamp is off/display is off), electricity is
still flowing to the instrument at the minimum level.
When you are not using the DTX-PRO for a long period
of time, make sure that you unplug the AC adaptor
from the wall AC outlet.
NOTE
When disconnecting the AC adaptor, turn the instrument and then carry out this procedure in reverse order.
 Connecting Headphones
Connect the headphones to the [
CAUTION
Do not use headphones at high volume for an extended
period of time. Doing so can cause loss of hearing.
To adjust the headphone volume, use the [MASTER VOLUME]
knob.
To adjust the headphone EQ, press the [MENU] button and
adjust the PhonesEQ parameter. (MENU/PhonesEQ)
For more information, refer to the Reference Manual (PDF).
16 DTX-PRO Owner's Manual
] (Standby/On) switch is in standby
] (headphone) jack.
AC adaptor cord
Power outlet
Front panel side
Cord hook
AC adaptor