Panasonic PV-DV101 Manual page 98

PB
Equipment :
----------
Adjustment Procedure:
1. Playback the Color Bar Standard Tape.
2. Adjust the VERTICAL SIZE CONTROL (VR901) so that the vertical
picture size becomes correct.
7.3.6.3. Centering Adjustment
Purpose:
To set the optimum picture position on the EVF picture.
Symptom of Misadjustment:
The EVF picture will be shifted.
Test Point :
----------
Adjustment :
Deflection Yoke Centering Magnet
Specification :
The picture position becomes centered on the EVF picture
Input :
Color Bar Standard Tape (VFM3010EDS)
Mode :
PB
Equipment :
----------
Adjustment Procedure:
1. Playback the Color Bar Standard Tape.
2. Adjust the Deflection Yoke Centering Magnet by turning them so
that the picture is centered in the Viewfinder.
Fig. E4-1
Fig. E4-2
98