1. Set the Capstan Tilt Adjustment Tool between Capstan Unit and
Chassis.
2. Tighten the Capstan Adjust Screw so that the plate of Capstan
Unit just touches to the Capstan Tilt Adjustment Tool.
7.2.4. T4 POST HEIGHT CONFIRMATION
Purpose:
To confirm so that the height of the T4 Post is proper.
Symptom:
If the height of the T4 Post is incorrect, the tape might be
damaged.
1. Remove 2 Screws (A) to remove the Left Cover.
Fig. T2-1
Fig. T2-2
Fig. T3-1
88