4. Rewind the tape into the DV Cassette Tape by turning the Capstan
Rotor clockwise.
5. Eject the DV Cassette Tape by applying+3 VDC Power Supply
again.
6. Take out the DV Cassette Tape from the Garage Unit.
5.1.8.2. Manual Method
1. Remove the Cabinet Parts. Refer to "CABINET SECTION" in
DISASSEMBLY/ASSEMBLY PROCEDURES.
2. Move the Pinch Roller Unit out so that the Pinch Roller is
separated from the Capstan Rotor Unit shaft. Then, remove the
tape from the tape path and all posts.
Fig. 6-2
Fig. 6-3
16