Wash Options - Fisher & Paykel FabricSmart WA8560P Installation Instructions & User Manual

Water Level
Auto water level
Your washer has the ability to automatically
select the most efficient water level for the load.
Place your clothes in the washer.
1
Select the wash cycle (and select 'Auto' water
2
level if not automatically selected).
Touch . The washer will automatically fill to
3
the correct water level for the load, for both
phases of the wash.
When washing an unusual load, eg large bulky
● ●
garments, items or pillows, we recommend you
select the 'Bulky' cycle.
If there is already water in the bowl, it is best to
● ●
manually select the water level.
Manual water level selection
The agitator has five levels marked on its stem
that can be used to help you select the correct
water level. Select the correct water level by
using the mark nearest to the top of the load.
The levels marked on the agitator do not
● ●
correspond exactly to the level of the water.
They indicate the level of dry clothes suitable
for the water level.
Your washer may occasionally add water during
● ●
agitation. This is to maintain the water level due
to the release of air trapped in the garments.
Out of balance loads, tangling or splash-over
● ●
can be caused by selecting a water level that is
too high.
22

WASH OPTIONS

Selecting 'Auto' water level
Water level guide on agitator