Fisher & Paykel FabricSmart WA8560P Installation Instructions & User Manual page 15

Using your washer
The buttons require only a gentle touch to activate.
Touch 'POWER'
1
Select your desired wash cycle by turning the SmartTouch™ Control Dial. The wash cycle
2
icons will illuminate as you turn the dial showing which cycle is selected (refer to the
'Wash cycles' section).
Choose your wash options, eg you may want a 'Warm' wash temperature and a 'Slow'
3
spin speed (refer to the 'Wash options' section).
Touch to start the cycle. The washer will start to fill with water and select the correct
4
wash action for your load.
For best fabric and colour care, remove your clothes as soon as the cycle has finished.
Use 'Keylock' mode to lock the buttons on the display, which prevents them from being
5
activated accidently by a washing basket or little fingers (refer to the 'FabricSmart™
washer controls' section).
'Delay Start' allows you to delay the start of your wash by 5 mins up to 18 hours (refer
6
to the 'Wash options' section).
6
If you wish to stop your FabricSmart™ washer
Touch .
● ●
During a spray rinse or spin, there will be a slight delay while the bowl slows to a stop
and the lid is unlocked.
IMPORTANT!
Failure to follow the advice in this guide may result in damage to your garments, and
your expectations of wash performance may not be met.
GETTING STARTED QUICKLY
to activate your FabricSmart™ washer.
3 4
13