Fisher & Paykel OB30SP Installation Manual page 9

Hide thumbs Also See for OB30SP:
Table of Contents

Advertisement

IMPORTANT!
Take care, the oven door is heavy.
z
Do not lift the oven door by its handle. Doing so may damage the door.
z
Ensure the oven and the door are cool before you begin to remove the door.
z
Before removing the door, ensure there is a large enough clear, protected surface in the kitchen to rest the door on.
z
To remove the door(s)
1
2
3
REMOVING AND REFITTING THE DOOR(S)
Open the door completely.
Open the hinge locks fully
on both sides
Holding the door on both
sides, lift door back up to 45°
and carefully pull the door out
and away from the hinges.
To refit the door(s)
1
2
3
4
Holding the door at 45°, carefully
align the hinge tongues with the
hinge slots. Push the door in until
you feel the latches locate into
position on each side.
Open the door completely and
ensure both hinges are secured
by the correct notches.
Rotate the locks up into the
closed position ensuring they rest
inside the slots completely. Note:
Incorrect installation will prevent
door from correctly sealing.
Close the oven door ensuring that
when closed, the door is vertical and
parallel to any surrounding cabinetry
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ob30dpOb30sOb30d

Table of Contents