Safety Precautions - AGFA Classic E.O.S. User Manual

Safety precautions

General safety instructions
The Classic E.O.S. was designed for processing medical X-ray films, and should
only be used for this purpose.
The processor may only be operated by qualified staff, skilled on the machine.
Make sure that only by Agfa authorized personnel has access to the processor.
Only trained and authorized service personnel can make repairs or changes to
the processor.
If there is visible damage to the machine casing, the processor should not be
started or used.
Do not override or disconnect the integrated safety features.
Disconnect the processor from the mains before performing any maintenance
activities.
Like all technical devices, the processor must be operated, cared for and ser-
viced correctly, as described in the documentation provided with the machine.
If the processor is not operated correctly or if you do not have it serviced cor-
rectly, Agfa is not liable for resulting disturbances, damages or injuries.
When installing the processor, care must be taken to ensure that there is either a
mains plug or an all-cable disconnecting device in the internal installation fitted
near the processor and that it is easily accessible.
If connections with other components or assemblies are made, Agfa can guaran-
tee safety only for combinations which are approved by Agfa.
If you notice conspicuous smoke or noise, disconnect the processor immedi-
ately.
7
1281C GB 20001204