Processing An Emergency Film - AGFA Classic E.O.S. User Manual

Processing an emergency film

It may happen that you have one or more films to process at a time when the
Classic E.O.S. is not completely ready for operation. This can be e.g.:
when the Classic E.O.S. is initializing and the developer has not yet reached the
set temperature,
when an error status message is displayed.
Still, the Classic E.O.S. enables you to process films in these conditions. Films
thus processed are referred to as 'emergency films'.
Emergency films do not always meet the quality standards of development,
rinsing or fixing. In addition, the archivibility of films thus processed is not
always guaranteed. Under particular circumstances, the film might be use-
less to make a proper diagnosis!
Proceed as follows to process emergency films:
1
Check the display.
Caution: emergency film processing is not possible if, e.g., the following message
appears:
(UURU 
6HH PDQXDO
Refer to 'Emergency film processing' on page 75 of the Classic E.O.S. Refer-
ence manual.
2
Place the emergency film to be processed on the feed table.
The processor accepts the film automatically and displays the following message on
the control panel:
(PHUJHQF\ ILOP
3OHDVH ZDLW
3
Wait until you hear a short beep.
You can now introduce the next emergency film to be processed.
1281C GB 20001204
√
19