Welcome To The Classic E.o.s - AGFA Classic E.O.S. User Manual

Welcome to the Classic E.O.S.

The Classic E.O.S. is a processor for medical X-ray films developed by Agfa.
The Classic E.O.S. cannot process rollfilms.
The Classic E.O.S. offers the following features:
Three fast processing cycles for optimal processing quality in accordance with
the film type that is used: High Throughput (HT), Intermediate Processing (IP)
and Rapid Processing (RP).
Operation of the processor can be completely customized by means of the fol-
lowing processing parameters:
• developer temperature,
• dryer stage,
• developer replenishment rate,
• fixer replenishment rate,
• jog-cycle function (standby developer and fixer replenishment),
• initial developer and fixer replenishment function.
The Classic E.O.S. ('Ecological Optimized System') features a twin fixer tank
system which reduces substantially the silver carry-over to the rinse water tank.
• After development, the exposed film enters the first fixer tank, where most of the
silver is removed from the film.
• The film then is transported through the second fixer tank, to be treated again with
fresh fixer.
• As a consequence, when the film is passed to the rinse water tank, silver freight
carry-over will be very low.
Agfa can guarantee optimal film quality and compliance with statutory regulations
only if Agfa materials are used.
6
1281C GB 20001204