Processing Films - AGFA Classic E.O.S. User Manual

Processing films

Processing a film is very easy and straightforward: you just have to place the
exposed film on the feed table and feed it into the feed slot of the Classic E.O.S.
The Classic E.O.S. will then process the film and deposit it in the exit tray.
The Classic E.O.S. can process all common brands of medical X-ray film suit-
able for machine processing. You can apply sheet films of the following sizes:
maximum width: 43.2 cm (17 inch),
smallest size: 10 x 10 cm.
DO NOT process rollfilm on the Classic E.O.S.
Processing under normal conditions
Proceed as follows:
1
Check whether the processor is switched on and ready for operation.
The display should show, for example, the READY message:
5($'<
53
Introduce large sheets of blank films (cleaning films), e.g. film size
35 x 43 cm, when the processor has been on standby for an extended
period of time, e.g. overnight, to remove any deposits or residue from the
transport path of the film.
16
d&
1281C GB 20001204