Switching The Classic E.o.s. On - AGFA Classic E.O.S. User Manual

Switching the Classic E.O.S. on

When operating the processor for the first time, make sure that the processor has
been installed in accordance with the Agfa installation instructions.
1
Locate the main switch and place it in position 'I'.
Do not touch the switches with wet fingers!
The processor starts an initialization procedure that may take 15 to 20 minutes.
During the initialization phase an emergency film can be processed if a film
is introduced on the feed table.
page 19.
2
The developer and fixer are heated.
cHDWLQJ
GHYHORSHU
You can watch the progress of heating as the temperature indication changes
accordingly.
12
Refer to 'Processing an emergency film' on
or, e.g.:
53 d&
1281C GB 20001204