Extreme Networks ExtremeSwitching 5320 Series Hardware Installation Manual page 51

Build Stacks
Example: Basic Stack with Eight Switches
Figure 25 shows cable connections for an 8-node stack using SummitStack 40G cables to connect
switches with integrated SummitStack ports.
Figure 25: SummitStack Cable Connections Using Eight Switches with Integrated SummitStack
Ports
Table 11 lists the recommended order for connecting the stacking ports in this example.
Table 11: Basic Stack with Eight Switches: Connections
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
Slot 7
Slot 8
Example: Stack with VIM1-SummitStack Modules
Figure 26 shows an example of a four-switch stack that combines two different switch models: two of
each model; four switches in all. For the first switch model, the stacking ports are on installed VIM1-
SummitStack modules. For the second switch model, the stacking ports are on installed SummitStack
stacking modules. The recommended order for connecting the stacking ports is the same as for the
example in
Connect this slot and port . . .
Stack Port 2
Stack Port 2
Stack Port 2
Stack Port 2
Stack Port 2
Stack Port 2
Stack Port 2
Stack Port 2
Example: Basic Stack with Eight Switches
ExtremeSwitching 5320 Series Hardware Installation Guide
Connect the Switches to Form the Stack Ring
. . . To this slot and port
Slot 2 Stack Port 1
Slot 3 Stack Port 1
Slot 4 Stack Port 1
Slot 5 Stack Port 1
Slot 6 Stack Port 1
Slot 7 Stack Port 1
Slot 8 Stack Port 1
Slot 1 Stack Port 1
on page 51.
51