Installation - Haier HYC-509 Instruction Manual

Installation

Installation environment
•Ambient temperature: 16 ° C to 32 ° C, and the optimal temperature range is 18 ° C to 25 ° C. Use
air conditioning system when necessary.
•Ambient humidity: less than 85% Rh.
•Avoid large amounts of dust.
•Avoid mechanical swing or vibration.
•Altitude of the working position of refrigerator: below 2000m.
•Input voltage: rated voltage ±10%.
•Overvoltage category:The transient state is Category II facility.
•Pollution Degree:2
•Since the refrigerator is sensitive to ambient temperature, it cannot operate normally
Caution
if is installed in an environment other than the above. Please use it after improving the
environment.
•It is prohibited to install the refrigerator outdoors. If the refrigerator gets wet in the rain,
it may cause electric leakage or electric shock.
•Keep it away from radiation area and avoid using radiation sensitive equipment near it.
Installation site
In order to ensure normal operation of the refrigerator and obtain the optimal performance, the
installation site of the refrigerator shall meet the following conditions:
•It cannot be installed in narrow and enclosed space, and the door of the installation room shall not
be smaller than this product. It should be at least ensured that the refrigerator can be moved in and
out normally, so as to avoid maintenance difficulties in case of fault; otherwise the goods stored in
the refrigerator may be spoiled due to delayed repair of the refrigerator.
•The floor of the installation site must be solid and flat.
•Do not share the same socket with plugs of other devices. The plug shall be securely connected to
the socket.
•Do not twist or stress the power cord.
•If the power cord needs to be lengthened, the cross-sectional area of the extension part shall not
be less than 2 mm
•Please check the working voltage before use. For areas with unstable voltage, a stabilizer that is
suitable for motor load may be adopted for voltage regulating, thus ensuring that the normal input
voltage maintains at rated voltage ±10% and the stabilizer power is greater than 4000W.
•The refrigerator shall be reliably grounded.
•If the power socket is equipped with a grounding wire, check if the grounding condition is good
before use.
•If the outlet is not equipped with any grounding wire, be sure to install the grounding wire by a
professional technician.
•Do not ground the refrigerator through the gas pipe, power hose, telephone line or
Warning
lightning rod, otherwise may cause electric shock.
•After installation, the power plug must be accessible to facilitate unplugging the power
cord in time in case of emergency. Do not cover the vents of the refrigerator with any
objects.
2
and the length shall not be longer than 3 m.
5