Haier HYC-509 Instruction Manual page 20

the lower right corner of the rightmost digital tube is normally ON, it means that the data export is
complete and the USB can be removed from the USB interface.
3.Data time setting (current time setting of the system):
Select the USB time selection parameter "T2", press the "Set" button and the temperature display
area of the refrigerator will display "P1" steadily. Press the "Set" button again and the inside
temperature display area will flicker and display the year (factory default 10). Select the year which
is displayed from 10 to 99; for example, select 18 to set 2018. At last, press the "Set" button to
save and confirm. After that, the inside temperature display area displays "P2" steadily. Press the
"Set" button and the inside temperature display area will flicker and display the month (factory
default 01). Press the "Down" button or the "Up" button and the value will switch over from 01 to 12.
After selecting the current month, press the "Set" button to save and confirm. After that, the inside
temperature display area displays "P3" steadily. Press the "Set" button and the inside temperature
display area will flicker and display the date (factory default 01). Press the "Down" button or the
"Increase" button and the value will switch over from 01 to 31. After selecting the current date,
press the "Set" button to save and confirm. After that, the inside temperature display area displays
"P4" steadily. Press the "Set" button and the inside temperature display area will flicker and display
the hour (factory default 01). Press the "Down" button or the "Up" button and the value will switch
over from 00 to 23. After selecting the current local time (hour), press the "Set" button to save
and confirm. After that, the inside temperature display area displays "P5" steadily. Press the "Set"
button and the inside temperature display area will flicker and display the minute (factory default
01). Press the "Down" button or the "Up" button and the value will switch over from 00 to 59. After
selecting the current local time (minute), press the "Set" button to save and confirm. And then, the
temperature display area of the refrigerator will display "P1" again, and now you can set P1-P5
again. After completion of setting, press the "Alarm test" button again and the inside temperature
display area will display the refrigerator in the temperature normally.
4.Note：
•In the above process of setting P1-P5, you may select and adjust the parameters by using the
"Down" button or the "Up" button. For example, if the inside temperature display area displays P1
(year), and there is no need to adjust the year (P1) and month (P2), you may directly reset the date
(P3). Press the "Up" button to select the date (P3) and then press the "Set" button, and the inside
temperature display area will flicker and display the date. Press the "Down" button or the "Up"
button to adjust the current date, and press the "Set" button to save and confirm. After completion
of setting, press the "Alarm test" button again and the inside temperature display area will display
the refrigerator in the temperature normally.
•Adopt USB with file format of FAT32;
•If the USB cannot export data, back up the files in the USB and then reformat it, or use an USB of
another brand.
18