Haier HYC-509 Instruction Manual page 8

Installation
1.Remove the packaging material and packaging tape
Remove all packaging materials and packaging tape used for shipping.
•When handling the refrigerator before unpacking, use forklift or package lifter. When
Caution
using a forklift, insert the fork from the bottom of the wood pallet from front or back of
the refrigerator and then handle the refrigerator.
•When using a package lifter, clip the machine from the bottom of the wooden pallet.
Be aware to clip the sides of the refrigerator only.
•After unpacking, use the casters of the refrigerator to handle the refrigerator.
•When handling the refrigerator, the titling angle shall not be more than 45°.
2.Check the supplied accessories.
Please check the items in the box according to
the packing list. If any difference, please contact
the after-sales service.
3.Location with adequate ventilation
Leave at least 10 cm of clearance around the
refrigerator for ventilation.
4.Fixing of the casters
Four casters, two leveling legs.
5.Standing
After leveling and cleaning the machine body, do
not power on the refrigerator immediately. Allow
the refrigerator to stand for more than 24 hours,
and then power it on to ensure that it can operate
normally.
At least 30cm away from the top
At least
10cm away
from the
back
At least
10cm away
from the left
6
At least
10cm away
from the
right