Installation Preparation - Haier TRF-31BINFAA Manual


Check that there is some resistance when opening the door of the
appliance. If it opens at the slightest touch it may mean that the door
seal needs to be replaced.

Check the door seal for any kinks, debris or damage. If you notice any,
and are unable to resolve the issue yourself, contact Customer Care so
that the seal can be replaced.

This can be due to the decor door(s) not being properly fitted. If you
are at all unsure, ask your fitter to check the décor doors.
If excessive ice has formed in the freezer:

Check that there is some resistance when opening the door of the
appliance. If it opens at the slightest touch it may mean that the door
seal needs to be replaced.

Check the door seal for any kinks, debris or damage. If you notice any,
and are unable to resolve the issue yourself, contact Customer Care so
that the seal can be replaced.

This can be due to the decor door(s) not being properly fitted. If you are at all unsure,
ask your fitter to check the decor doors.
If one or more of the LED units within the appliance is not working:

Contact Customer Care to arrange a service visit.

Installation preparation

This appliance must never be installed close to heat sources, e.g. heating elements
or cookers, nor in damp places.
Seek the help of another individual, or two, when installing this appliance. This
appliance may have sharp edges. Wear adequate PPE for the task and
environment.

To ensure the appliance is level, you should use the height
adjustable feet at the front of the appliance.

The cooling system at the rear of the appliance must not
touch the rear wall. The greater the gap, the better.

The appliance must be installed with adequate ventilation.
Ensure that there is clearance above the appliance to allow
air to escape and that there is space between the rear of the
appliance and the wall.
23