Macsubcmd() 0X0058 Afe Register; Macsubcmd() 0X0060 Lifetime Data Block 1; Macsubcmd() 0X0070 Manufacturerinfo - Texas Instruments BQ28Z610-R2 Technical Reference Manual

I2C Commands
FET_EN (Bit 4): All FET Action
1 = Enabled
0 = Disabled
GAUGE_EN (Bit 3): Gas Gauging
1 = Enabled
0 = Disabled
DSG_TEST (Bit 2): Discharge FET Test
1 = Discharge FET test activated
0 = Disabled
CHG_TEST (Bit 1): Charge FET Test
1 = Charge FET test activated
0 = Disabled
RSVD (Bit 0): Reserved

12.2.34 MACSubcmd() 0x0058 AFE Register

This command returns the AFERegister() values on MACData(). These are the AFE hardware registers and are
intended for internal debug use only.
Status Condition
Activate 0x0058 to MACSubcmd()

12.2.35 MACSubcmd() 0x0060 Lifetime Data Block 1

This command returns the Lifetime data on MACData().
Status Condition
Activate 0x0060 to MACSubcmd()

12.2.36 MACSubcmd() 0x0070 ManufacturerInfo

This command returns ManufacturerInfo on MACData().
88 BQ28Z610-R2
Action
Output AFE Register values on MACData() in the following format:
AABBCCDDEEFFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUU
where:
AA: AFE Interrupt Status. AFE Hardware interrupt status (for example,
wake time, push-button, and so on)
BB: AFE FET Status. AFE FET status (for example, CHG FET, DSG
FET, input, and so on)
CC: AFE RXIN. AFE I/O port input status
DD:AFE Latch Status. AFE protection latch status
EE: AFE Interrupt Enable. AFE interrupt control settings
FF: AFE Control. AFE FET control enable setting
GG: AFE RXIEN. AFE I/O input enable settings
HH:
II:
JJ:
KK: AFE Cell Balance. AFE cell balancing enable settings and status
LL: AFE ADC/CC Control. AFE ADC/CC Control settings
MM: AFE ADC Mux. AFE ADC channel selections
NN:
OO: AFE Control. AFE control on various HW based features
PP: AFE Timer Control. AFE comparator and timer control
QQ: AFE Protection. AFE protection delay time control
RR: AFE OCD. AFE OCD settings
SS: AFE SCC. AFE SCC settings
TT: AFE SCD1. AFE SCD1 settings
UU: AFE SCD2. AFE SCD2 settings
Action
Outputs lifetime data values of Voltage, Current, Power, and
Temperature on MACData()
Copyright © 2022 Texas Instruments Incorporated
www.ti.com
SLUUCO0 – APRIL 2022
Submit Document Feedback