Funzionamento In Modalità Automatica Da Rete - Mains Automatic Mode Opertation; Impiego Come Generatore - Use Of Machine Like Generator - Generac Power Systems V20 Owner's Manual

Hide thumbs Also See for V20:
Table of Contents

Advertisement

V20 iQ20 CUBE+
11.11.6 FUNZIONAMENTO IN MODALITÀ AUTOMATICA DA RETE – MAINS AUTOMATIC
MODE OPERTATION
Portare
il
selettore
"RETE" (
)
Portare
gli
interruttori
differenziale (3 – 4) posti sul quadro frontale in
posizione "ON"(I).
Premendo
il
pulsante
Automatica, l'icona
abilitate:
per Crepuscolare,
È possibile abilitare una o più opzioni, a
seconda di quali sono disponibili
Per una completa descrizione delle funzionalità
Crepuscolare e Timer della logica, fare
riferimento
al
MANUALE
GTL01 Controller.

11.12 IMPIEGO COME GENERATORE - USE OF MACHINE LIKE GENERATOR

Avviare il motore in modo manuale.
È possibile utilizzare contemporaneamente la
torre faro e prelevare corrente dalla presa
monofase (8). Si raccomanda di non superare i
dati di targa.
Collegarsi al generatore utilizzando spine
adatte alle prese e cavi in ottime condizioni.
La sezione minima dei cavi d'allacciamento
deve essere scelta in base alla tensione, alla
potenza installata ed alla distanza tra sorgente
ed utilizzo.
(2)
in
posizione
magnetotermici
e
(A2)
in
Modalità
è sostituita dalle icone
per Timer
D'ISTRUZIONE
Turn the select (2) to "MAINS" (
Switch "ON" (I) the RCD and all circuit
breakers (3 – 4) on the control panel.
Press the button (A2) in Automatic Mode, the
icon
is substituted by the icons enabled:
for Light Sensor,
It is possible to enable one or more options,
depending on which are available.
For complete description of Light Sensor and
Timer the logic, capability refer to the
OWNER'S MANUAL GTL01 Controller.
Start the engine manually.
It is possible, at the same time to use the
lighting tower and to draw current from the
single phase socket (8). It is recommended
not to exceed the plate data.
Connect up to the generator using plugs that
fit the sockets and cables in excellent
condition.
The minimal section of connection cables
must be choose according to the voltage, to
the installed power and the distance between
source and uses.
39
)
.
for Timer.
TL211-01-00-00
05-11-2018
Italiano - English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iq20Cube+

Table of Contents