Rx3I Profinet Scanner Specifications - Emerson PACSystems RX3i User Manual

User Manual
GFK-2737L
1.2

RX3i PROFINET Scanner Specifications

Table 2 RX3i PROFINET Scanner Specifications
Specification
PROFINET Support
Controller CPU Version
Required
PAC Machine Edition
Version Required
Power Requirements
Operating Temperature
Range
Number of PROFINET Ports
Front Ethernet Port
(for firmware upgrades)
SD Card
PNS Status and
Control Bits
PROFINET I/O production
rate (ms)
(I/O Update Rate)
Number of MAC Addresses
Jul 2022
Description
PROFINET Version 2.3 Class A IO-Device
Redundantly controlled operation conforms to PROFINET V2.3 Type S-
2 System Redundancy.
RX3i CPU315/CPU320 with firmware version 7.10 or later RX3i
CPE305/CPE310 with firmware version 7.10 or later RXi Controller with
firmware version 7.80 or later. All versions of CPE302.
Version 8.5 SIM2 or later
Rev. –Bxxx or later:
3.3Vdc: 0.6A with no SFP
devices
1.3A maximum (two
SFP devices
installed, 0.35 A per
SFP)
Rev. –Bxxx or later:
5 Vdc: 0.7 A maximum
Rev. -Bxxx or later:
• -25°C to 60°C de-rated
to 57°C:
• If 100 Mbps Fiber SFPs
installed, or
• If Copper SFPs operating
at 1 Gbps
Two RJ45 and Two SFP Cages
(SFP devices not included, available separately.)
Rev. –Bxxx or later:
One RJ45 supporting
10/100/1000Mbps Ethernet for
firmware updates.
Supports SD and SDHC cards.
32 input status bits and 32 output control bits
Configurable selections: 1, 2, 4, 8, 16, 32, 64, 128, 256 or 512 ms
Rev. -Bxxx or later: 6
One per external port (including
additional front panel port) and
one internal for switched ports.
Section 1
Rev. –Axxx:
3.3 Vdc: 1.2A with no SFP devices
installed,
1.9A maximum (two SFP
devices installed,
0.35A per SFP)
Rev. –Axxx:
5 Vdc: 1.1A maximum
Rev. -Axxx:
• 0°C to 60°C de-rated to
57°C:
• If 100 Mbps Fiber SFPs
installed, or
• If Copper SFPs operating at
1 Gbps
Rev. – Axxx:
One Micro-B connector. USB 2.0
compliant running at Full-speed (12
MHz)
Rev. -Axxx: 5
One per external port and one
internal.