Installation Of Sensors - Furuno GP-1850WF Installation Manual
Color gps/plotter/sounder color dgps/plotter/sounder
Hide thumbs
Also See for GP-1850WF:
- Operator's manual (115 pages) ,
- Specifications (4 pages) ,
- Installation & maintenance (75 pages)
Table of Contents
Advertisement
1. INSTALLATION
1.4
Installation of Sensors
Transom mount water temperature sensor T-02MTB
• Fix the cable at a convenient location with cable clamp.
• When the cable is led in through the transom board, make a hole of approx. 17 mm
diameter to pass the connector. After passing the cable, fill the hole with a sealing
compound.
D>50 cm
How to install transom mount water temperature sensor T-02MTB
1-20
D
M5 x 20
Mount sensor
flush with hull bottom.
Advertisement
Table of Contents
