Table of Contents
Advertisement
LOG PLACEMENT FOR BRT4042, BRT4342 AND BRT4542
MODELS
1. Place large back log (log 1) onto grate making sure notches rest
over grate (see Figure 26).
2. Insert lower end of log 2A between first two grate fingers and
position upper end into notch on front of log 1. See Figure 26.
Place log 2B on front right side of grate as shown in Figure 26.
3. Place log 3 into notch on top left of log 1, resting lower end on
left two grate fingers (see Figure 27).
4. Place upper end of log 4 into notch on log 1 as shown in Figure
27. Rest lower end of log 4 on middle grate finger as shown in
Figure 28.
5. Place upper end of log 5 into notch on top inner right of log 1
(see Figure 28). Rest lower end of log 5 on middle grate finger
as shown in Figure 29.
6. Place log 6 into notch on top right of log 1 (see Figure 28). Rest
lower end of log 6 on top of log 2B (see Figure 29).
As an option to enhance the look of the hearth, you may place the
lava rock provided around front and sides of burner pan.
NOTICE: Do not put lava rock inside the burner pan or
around the air mixer fitting. Placing lava rock inside
the burner pan or blocking the openings of the propane/
LP air-mixer could cause performance problems.
Notch
Log 2A
Figure 26 - Installing Logs 1, 2A and 2B
14
INSTALLATION Continued
Log 1
Log 2B
Figure 29 - Logs Installed for M42, M42P, VM42 and VM42P
SuperiorFireplaces.US.com
Log 3
Notches
Figure 27 - Installing Logs 3 and 4
Log 5
Figure 28 - Installing Logs 5 and 6
Models
Log 4
Log 1
Log 6
Log 1
Notch
Log 2B
126736-01_E
Advertisement
Table of Contents
