Table of Contents
Advertisement
LOG PLACEMENT FOR BRT4036, BRT4336 AND BRT4536
MODELS
1. Place small front right log (log 1) on right front of grate as shown
in Figure 22.
2. Place large back log (log 2) onto grate making sure notches rest
over grate as shown in Figure 22.
3. Place log 3 into notch on log 2, resting front end on top of log 1
(see Figure 23).
4. Place upper end of log 4 into notch on log 2 as shown in Figure
23. Rest lower end of log 4 onto middle grate finger as shown in
Figure 24.
5. Place upper end of log 5 into notch on left of log 2 (see Figure
24). Rest lower end of log 5 on grate as shown in Figure 25.
6. Insert lower end of log 6 between first two grate fingers as
shown in Figure 25 and position upper end of log 6 into notched
area on front of log 2 as shown in Figure 25.
As an option to enhance the look of the hearth, you may place the
lava rock provided around front and sides of burner.
NOTICE: Do not put lava rock inside burner pan or
around the air mixer fitting. Placing lava rock inside
burner pan or blocking openings of the propane/LP
air-mixer could cause performance problems.
Log 2
Notch
Figure 22 - Installing Logs 1 and 2
126736-01_E
INSTALLATION Continued
Log 6
Notch
Log 1
SuperiorFireplaces.US.com
Log 4
Log 2
Figure 23 - Installing Logs 3 and 4
Log 5
Figure 24 - Installing Logs 5 and 6
Figure 25 - Logs Installed for 36" Models
Log 3
Notches
Log 1
Notch
Log 4
13
Advertisement
Table of Contents
