Calibration Review - Hach sension6 Instruction Manual

SECTION 3,
continued

3.3.7 Calibration Review

4. Press the
READ ENTER
showing .
100%
5. Press the
READ ENTER
while the meter completes the calibration.
6. When the calibration is complete, the meter will return to the
read mode. Press the
to back out of the calibration routine, one screen at a time,
without completing a calibration.
To review the last calibration:
1. Press the
REVIEW
last calibration will show.
2. Press the key on the keypad to view the time of the
TIME
last calibration.
3. Press the up arrow. The dissolved oxygen concentration of
calibration will show.
4. Press the
CONC %
values of calibration.
5. Press the up arrow key. The barometric pressure entry of
calibration will show.
6. Press the up arrow key. The altitude entry of calibration
will show.
7. Press the up arrow key. The salinity entry of calibration will
show. Press the
43
key three times to skip to the display
key. The stabilizing icon will appear
key during the calibration sequence
EXIT
key on the keypad. The date and year of the
key to view the % saturation and mg/L
key to leave the calibration review.
EXIT