Table of Contents
Advertisement
SECTION 1,
continued
1.4 Maintenance
1.5 Audible Signals
The meter is designed to be maintenance-free. If the meter gets
dirty, wipe the surface with a damp cloth. Use a cotton-tipped
applicator to clean or dry the connectors if they get wet.
The meter will beep under certain conditions:
•
when a non-functional key press is made (one beep)
•
when measurement stability is reached during calibration
(three beeps)
•
in reading mode, when the display lock is turned on and
stability is reached.
21
Advertisement
Table of Contents
