14
en | Installation and wiring
2.3
Detaching the speaker from the QuickSAM bracket
To detach the speaker from the QuickSAM bracket:
1.
2.
Detaching the speaker from the QuickSAM™
with the mounting tool
Refer to
–
2022-01 | 04 | F.01U.177.815
Loosen the socket head bolt B. Refer to System overview, page 6 .
Press in the mounting tab while pulling the speaker away from the mounting surface.
Press in the mounting tab with the included mounting tool.
Or
Press in the mounting tab by hand.
System overview, page 6
Detaching the speaker from the QuickSAM™ by
hand
Installation Manual
ZX1i Series Loudspeaker
Electro-Voice