Table of Contents
Advertisement
ZX1i Series Loudspeaker
2
Installation and wiring
2.1
QuickSAM™ (Strong-Arm-Mount™) system
To mount a speaker system with the QuickSAM™ system (Strong-Arm-Mount™):
1.
2.
3.
Warning!
Tighten socket head bolt B. Refer to System overview, page 6 . Failure to tighten socket head
!
bolt B may allow the speaker to disengage from the QuickSAM™ bracket, possibly resulting in
serious injury.
Refer to
–
2.2
Step by step installation
2.2.1
Mounting the QuickSAM™ bracket to the mounting surface
Warning!
It is the installer's responsibility to ensure that the mounting surface is stable and can
!
support more than the speaker's weight.
Caution!
Touching uninsulated terminals or wiring may result in an unpleasant sensation.
!
To mount the QuickSAM™ bracket to the mounting surface:
–
–
–
–
–
Vertical mounting
Electro-Voice
Securely attach the surface bracket to the wall or ceiling.
Click the ZX1i™ enclosure onto the bracket.
Aim the enclosure and tighten both bolts.
System overview, page 6
Use only industry-accepted fasteners and mounting methods when mounting the bracket.
Consult an expert if you are not sure.
Read Selecting the voltage tap, page 9 and Selecting the horn dispersion orientation,
page 9 before attaching the speaker.
For standard vertical installation, mount the QuickSAM™ bracket as shown.
For horizontal mounting configurations, mount the bracket on the bottom side. This
allows the speaker to be mounted closer to the ceiling.
Horizontal mounting
Installation Manual
Installation and wiring | en
2022-01 | 04 | F.01U.177.815
7
Advertisement
Table of Contents
