Table of Contents
Advertisement
the outdoor unit will be frosted resulting in low efficiency
of heating, in which case, the controller will automatically
start to defrost with DEFROST displayed.
Note: No heating for cooling-only unit and auto mode will
be shielded after setting energy saving.
Timer Setting (Fig.9, 10, 11)
6)
Timer function in this wired controller conneted with
weekly timer is invalid and wired controller will be
controlled by weekly timer.
Either in ON status or OFF status of the unit press TIMER
button into timing setting, and then press▲ or ▼button to
set timing(Fig.7),set time(Fig.8) and delete
(Fig.9). At last, press TIMER to set it.
timing
28
TIMER
Fig.9
TIMER
Fig.10
TIMER
Fig.11
Advertisement
Table of Contents
