Fisher FSK-180B-EU Operating And Installation Instruction Manual page 10

remote control signal will be shielded too, the setting temp. will display "CC".
★ The set temperature range under each mode:
HEAT -------- 16℃～30℃
COOL -------- 16℃～30℃
DRY -------- 16℃～30℃
FAN -------- The temp. cannot be set up
AUTO -------- The temp. cannot be set up
4）Swing mode set up(Fig.5)
★ When pressing "SWING" button, the type style
"SWING" will be displayed on LCD, the unit will run
in Swing mode
★ when repressing the "SWING" button, that the type
style "SWING" will be disappeared, and the unit w
st op running in Swing mode.
Note: The SLEEP function could be set up by wireless remote control.
5) Running mode setup(Fig.6)
★ When press this button once, the operation mode will
be changed as follow:
★ At "COOL" mode, the "COOL" icon will light on, the
current temperature should be set up lower than the
ambient temperature. If the setting temperature is
higher than the ambient temperature, the COOL mode will not start, only the fan is active.
ill
7
MODE
FAN
SWING
TIMER
ON/OFF
Fig 5
MODE
FAN
SWING
TIMER
ON/OFF
Fig 6