3Com EtherLink 3CR990-TX-95 User Manual page 75

3 Click Configure.
The 3Com EtherLink 10/100 Mbps PCI NIC with 3XP
Processor screen appears.
4 Click the Advanced tab.
5 Select Enable Offloads in the Property list box.
6 Select the appropriate value in the Value entry box
(shown in the following table) for the desired offload
state.
7 Close all open windows.
The following table describes values for the offload
functions:
Value
All Offloads Disabled
cksum
cksum-ipsec
cksum-tcpseg
cksum-tcpseg-ipsec
ipsec
tcpseg
tcpseg-ipsec
802.1p
802.1p-cksum
802.1p-cksum-ipsec
802.1p-cksum-tcpseg
802.1p-cksum-tcpseg-ipsec Packet Priority and TCP Checksum
802.1p-ipsec
802.1p-tcpseg
802.1p-tcpseg-ipsec
Using Windows 2000 Offload Features
Offload Function Enabled
No offloads
TCP Checksum
TCP Checksum and IPSec
TCP Checksum and TCP
Segmentation
TCP Checksum and TCP
Segmentation and IPSec
IPSec
TCP Segmentation
TCP Segmentation and IPSec
Packet Priority
Packet Priority and TCP Checksum
Packet Priority and TCP Checksum
and IPSec
Packet Priority and TCP Checksum
and TCP Segmentation
and TCP Segmentation and IPSec
Packet Priority and IPSec
Packet Priority and TCP Segmentation
Packet Priority and TCP Segmentation
and IPSec
75