3Com EtherLink 3CR990-TX-95 User Manual page 59

Installing DynamicAccess Software for a Server NIC
The EtherCD Welcome screen appears.
4 Click NIC Software.
5 Click DynamicAccess Technology.
6 Click Install DynamicAccess Technology.
7 Select the appropriate menu option for your
operating system (Windows 2000 or Windows NT 4.0)
Ignore the Windows 95/98 menu option. DynamicAccess
server software is not supported on a PC running
Windows 95 or Windows 98.
8 Do one of the following:
If you selected Windows 2000, click Install
I
DynamicAccess Technology for Windows 2000
Servers.
When DynamicAccess server features are installed
for Windows 2000, LAN connections bind to the
DynamicAccess protocol and real protocols bind to
the DynamicAccess Miniport. Do not modify these
bindings.
If you selected Windows NT 4.0, click Install
I
DynamicAccess Technology for Windows NT 4.0
Servers.
When DynamicAccess server features are installed
for Windows NT, NICs bind to the DynamicAccess
protocol and real protocols bind to the
DynamicAccess Miniport. Do not modify these
bindings.
The DynamicAccess Software Installation program starts.
9 When the DynamicAccess Technology installation is
finished, exit the EtherCD, and then exit Windows.
10 Restart the PC.
You must restart the PC to complete the installation.
59