3Com EtherLink 3CR990-TX-95 User Manual page 35

Figure 4 Installing the NIC
1 Carefully insert the NIC in the empty PCI slot, as
shown.
Press firmly to ensure that the NIC is fully seated in the slot.
Secure the NIC with the screw if you removed one earlier.
If you want to install the Remote Wake-Up cable, go
to the next section, Connecting the Remote Wake-Up
Cable to continue the installation. If you do not want to
connect the cable, continue with step 2.
2 Replace the computer cover and plug in the power
cord.
Do not turn on the power to the computer.
Installing and Connecting the NIC
1 Remove slot cover
2 Insert NIC
PCI slots
35