Digital Zoom - Hitachi VM-SPIA Instruction Manual

DIGITAL ZOOM

DIGITAL ZOOM
This feature allows you to increase the magnification of the image at the center of the
screen up to 2 or 8 times greater than the extreme telephoto position.
1. Turn the operate control to select "ZOOMx16", "ZOOMx64", "EXPAND" or "SLIM".
The display in the viewfinder will depend on the switch position as follows.
2. Press and hold "T" side of the power zoom switch. The digital zoom functions from
the extremely telephoto position of X8.
• "ZM:1" enlarges the image from X8 to X16.
• "ZM:2" enlarges the image from X8 to X64 and adds mosaic special effect.
• "ZM:2 with EXPAND" enlarges the image from X8 to X64 also widens it.
• "ZM:2 with SLIM" enlarges the image from X8 to X64 and also makes it thinner.
You can control the digital enlargement ratio by pressing the "T" or "W" side of the
power zoom switch.
NOTE: If you select a zoom ratio over X8, it is displayed, in the viewfinder. At X36, for
example, "X36" is displayed.
3. After using the digital zoom feature, turn the operate control to select "ZOOMx16" or
"ZOOMx64". If "EXPAND" or "SLIM" is selected, the image perspective seen in the
viewfinder is different from the image perspective that was shot.