Hitachi VM-SPIA Instruction Manual page 23

POWER SOURCES
NOTES:
• This AC adapter/charger is universal around the world. If you use the camera/recorder in
some foreign countries, an AC plug adapter (not supplied) may be necessary.
• When using the AC adapter/charger to power the camera/recorder, the battery level
indicator may display
meaning when using the Ac adapter/charger to power the camera/recorder.
WHEN USING WITH THE CAR BATTERY (By using optional car battery cord Hitachi
VM-CC80A)
1. Connect the car battery cord to the car's cigarette lighter socket.
2. Open the case.
Refer to "WATER-RESISTANT" on page 8.
3. Connect one end of the DC cord (provided) to the DC Input (6V) jack of the
camera/recorder.
4. Connect the other end of the DC cord to the "DC OUTPUT" of the car battery cord.
NOTES:
• The car battery cord is designed to be used only with automobiles having a 12/24-volt
negative ground system.
• To prevent fire or shock hazard or damage to your camera/recorder, please use only
Hitachi's car battery cord model VM-CC80A.
NOTE: Be sure to turn off power of the camera/recorder when attaching or detaching a
power supply (battery, AC adapter/charger, etc.) to the camera/recorder.
" " . This indicator is used for battery operation and has no