Specifications - Murray E20M42 Operator's Manual

NOTE: Specifications are correct at time of printing and are subject to change without notice.
ENGINE (20HP):
Make Briggs & Stratton
Model ELS
Horsepower 20 @ 2750 rpm
Displacement 540cc
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers)
code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in
accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at
3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and
engine-to-engine variability. Given both the wide array of products on which engines are placed and the variety of environmental
issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of
power equipment (actual "on-site" or net horsepower). This difference is due to a variety of factors including, but not limited to,
accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating
conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations,
Briggs & Stratton may substitute an engine of higher rated power for this Series engine.

SPECIFICATIONS

CHASSIS:
Fuel Tank Capacity
Rear Wheels
Front Wheels
TRANSMISSION:
Type
Hydraulic Fluid
Continuous Torque
Output
Maximum Weight
per Axle
3.25 Gallons (12,3 L)
Tire Size: 18 x 8.5-8
Inflation Pressure: 10-12 psi (0,69-0,83 bar)
Tire Size: 11 x 4-5
Inflation Pressure: 18-20 psi (1,24-1,30 bar)
Hydro-Gear EZT ZC-AHBB-2A7B-1DPX
20W-50 Premium Engine Oil
115 ft. lbs. (155.9 Nm)
340 lbs (154.2 kg)
35