Bluetooth Operation - Sylvania SP5752 Manual

Pairing the speaker with Bluetooth devices (phone or music device)
1. Plug one end of the adapter to DC IN jack of the speaker, plug the adapter into the wall
outlet, slide the power switch to ON position to turn on the unit. The indicator will blink
blue and green alternatively, wait until the indicator turns GREEN and blinks.
2. Press the MODE button repeatedly to turn to Bluetooth mode, the indicator will turn BLUE
and blink, now it is in pairing mode.
3. Activate the Bluetooth function on your Bluetooth device (phone or music device). Please
refer to the manufacturer's instructions of your device.
4. Once you have activated Bluetooth on your device, select the speaker name list from the
list of available Bluetooth devices.
NOTE:
The pairing name
two smaller units.
5. Once paired successfully, Bluetooth indicator will stop blinking and a tone will be heard.
6. If pairing is unsuccessful, turn off the speaker first and then re-pair following above steps.
7. Once you have paired the speaker with a device, the speaker will remember this device
and will pair automatically when the device's Bluetooth is activated and in range.
During playing:
Press the button to pause, press again to resume playing.
Turn the volume knob to adjust the volume.
NOTE:
Only one device can be paired and connected with one unit.

BLUETOOTH OPERATION

SP5752
is for the bigger unit.
SP5752A
17
SP5752B
and are for the