Graco Reactor A-25 Repair Parts page 57

Category
Fluid Inlets
Fluid Outlets
Fluid Circulation Ports
Maximum Fluid Temperature 190°F (88°C)
Maximum Output (10 weight
oil at ambient temperature)
Output per Cycle (A and B) Model A-25: 0.031 gal. (0.117 liter)
Line Voltage Requirement
Amperage Requirement
Heater Power
(A and B heaters, no hose)
Sound Power, per ISO
9614-2
Sound Pressure, 1 m from
equipment
Weight
Wetted Parts
®
Loctite is a registered trademark of the Loctite Corporation.
309813B
Data
Models A-25, A-XP2, and H-XP3: 3/4 npt(f)
Models A-50 and H-50: 1" npt(f)
Model HT heat packages: 1/2 npt(f) on heater inlet blocks
Component A (ISO): #8 JIC (3/4-16 unf), with #5 JIC adapter
Component B (RES): #10 JIC (7/8-14 unf), with #6 JIC adapter
1/4 npsm(m), with plastic tubing, 250 psi (1.75 MPa, 17.5 bar) maximum
Model A-25: 20 lb/min (9 kg/min) at 60 cycles/min
Models A-50 and H-50: 50 lb/min (22.5 kg/min) at 50 cycles/min
Model A-XP2: 1 gpm (3.8 liter/min) at 60 cycles/min
Model H-XP3: 3.6 gpm (13.7 liter/min) at 50 cycles/min
Models A-50 and H-50: 0.114 gal. (0.431 liter)
Model A-XP2: 0.0193 gal. (.073 liter)
Model H-XP3: 0.072 gal. (0.274 liter)
230V 1 phase and 230V 3 phase units: 195-264 Vac, 50/60 Hz
380V 3 phase units: 338-457 Vac, 50/60 Hz
See page 4.
Model HT-6.0: 6000 Watts
Models A-25, A-XP2, and HT-10.2: 10200 Watts
Models A-50, H-50, H-XP3, and HT-15.3: 15300 Watts
Model A-25: 94.7 dB(A) at 1000 psi (7 MPa, 70 bar), 3.0 gpm (11.4 lpm), 15 cpm
Model A-50: 86.5 dB(A) at 1000 psi (7 MPa, 70 bar), 3.0 gpm (11.4 lpm), 15 cpm
Model A-XP2: 94.7 dB(A) at 2000 psi (14 MPa, 140 bar), 0.5 gpm (1.9 lpm), 15 cpm
Model H-50: 88 dB(A) at 1000 psi (7 MPa, 70 bar), 3.0 gpm (11.4 lpm), 20 cpm
Model H-XP3: 103 dB(A) at 2000 psi (14 MPa, 140 bar), 0.5 gpm (1.9 lpm), 25 cpm
Model A-25: 81 dB(A) at 1000 psi (7 MPa, 70 bar), 3.0 gpm (11.4 lpm), 15 cpm
Model A-50: 78.8 dB(A) at 1000 psi (7 MPa, 70 bar), 3.0 gpm (11.4 lpm), 15 cpm
Model A-XP2: 81 dB(A) at 2000 psi (14 MPa, 140 bar), 0.5 gpm (1.9 lpm), 15 cpm
Model H-50: 78 dB(A) at 1000 psi (7 MPa, 70 bar), 3.0 gpm (11.4 lpm), 20 cpm
Model H-XP3: 88 dB(A) at 2000 psi (14 MPa, 140 bar), 0.5 gpm (1.9 lpm), 25 cpm
Models A-25 and A-XP2: 400 lb (180 kg)
Model A-50: 480 lb (216 kg)
Model H-50: 475 lb (214 kg)
Model H-XP3: 485 lb (218 kg)
Models HT-6.0, HT-10.2, and HT-15.3: 333 lb (150 kg)
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, chemically
resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Technical Data
57