Graco Reactor A-25 Repair Parts page 31

Replace Transformer
Use this procedure to replace transformer. To
replace terminal block (B) and wire harness (C)
only, order Part No. 248113 Transformer Repair
Kit. See manual 309930.
1. Turn main power OFF
supply.
Detail A: Terminal Block
PA PC
F . 10. Transformer
IG
309813B
. Disconnect power
B
TI3934a
WARNING
Read warnings, page 8. Wait 5 min for stored voltage
to discharge (E-30 and E-XP2 models only).
2. Open Reactor cabinet.
3. Remove bolts holding transformer to cabinet floor.
Slide transformer forward.
4. Unplug 3-pin wire harness connector (C) from wire
harness coming from temperature control board.
5. Remove transformer from cabinet.
6. Install new transformer in reverse order.
Detail B: Circuit Breaker Module
T4
C
806
817A
R
Repair
TI2514A
TI3470b
31