LG KP233 User Manual page 94

KP233_italyEng_TIM_080416
Getting started
Disconnecting the
charger
Disconnect the charger from the
phone as shown in the diagram below.
Note
]
Ensure the battery is fully charged before
using the phone for the first time.
]
In the case the battery is not properly
charged, please turn the phone off and
on using the power key. Then detach and
reattach the battery, and recharge the
phone.
Turning your phone
on and off
Turning your phone on
1. Install a battery to the handset and
connect the phone to an external
power source such as the charger, or
16
2008.4.16 5:31 PM
cigarette lighter adapter. Or install a
charged battery pack to the
handset.
2. Press and hold
seconds until the LCD screen is
turned on.
3. Depending on the status of the PIN
code request setting you may need
to enter your PIN code.
Turning your phone off
Press and hold
until the LCD screen is turned off.
Access codes
You can use the access codes
described in this section to avoid
unauthorised use of your phone. The
access codes (except PUK and PUK2
codes) can be changed by using the
Change codes feature (Menu #.5.5).
PIN code (4 to 8 digits)
The PIN (Personal Identification
Number) code protects your SIM card
against unauthorised use. The PIN
Page 16
for a few
for a few seconds
code is
card. W
set to O
PIN cod
switche
request
connec
without
PIN2
The PIN
SIM car
functio
Charge
functio
support
Check w
further
PUK c
The PU
required
phone.
with the
service
lose the
service